2.离心盘将不同长度的秸秆盖进行整理，送到送盖轨道上，送到带式正盖装置。3.单头全伺服旋盖机通过上盖输送带将瓶盖送入夹盖筒。在直线伺服上料盖的驱动下，当上料盖处于最高位置时，两个爪先松开再合上并抓住上料盖。封头在升降伺服电机的驱动下下降。盖校正筒首先缩回夹头，然后盖住吸管的芯夹。用于夹紧吸入管的气缸位于伺服电机驱动处，停在瓶口处。当移液器可靠插入瓶口时，夹管圆筒打开并继续下降，盖头继续下降，旋上瓶盖。泵盖的出水口被旋盖头上可调节的偏心定心杆堵住，使泵盖的出水口始终与瓶身相连。 Screw cap tightness can be adjusted by servo motor on the touch screen. 4.This machine adopts servo control mode, which can quickly adjust in place when product specifications are changed. The height of the bottle body and the length of the suction tube can be set. When changing the specifications, the parameters of the corresponding bottle shape specifications can be directly called, and the cylinder for calibrating the suction pipe is calibrated in place under the driving of the lifting servo motor. At the same time, the positioning pin is installed on the main turntable, which can be quickly replaced. Each set of star wheel turntable has a digital code, which can not be confused. Screwing cap torque is directed controlled on touch; no need to adjust the height of the cover. If the size of the lid head is the same, the length of the tube is different, changing a specification, only need 5 minutes.